How to Make Wood Paneling Look Like Drywall

If you’re sick of looking at wood paneling that’s been around since the ’70s, there are ways to make it look more like drywall. You can’t take the wood out, but you can cover it up. With a little bit of elbow grease and some paint, you can transform your wood paneling into something that looks much more modern.

How to make wood paneling look like drywall-sheetrock – How to paint wood paneling

  • Remove all of the wood paneling from the wall
  • Inspect the wall for any damage that will need to be repaired before continuing
  • Apply a layer of drywall compound to the entire surface of the wall
  • Allow the compound to dry completely
  • Sand the surface of the wall until it is smooth
  • Apply a primer to the surface of the wall and allow it to dry completely
  • Paint the surface of the wall with your desired paint color

How to Make Wood Paneling Look Like Shiplap

One of the most popular looks in home décor right now is shiplap. This rustic yet refined look can be achieved by using wood paneling, and it’s actually quite easy to do! Here are some tips on how to make wood paneling look like shiplap:

1. Choose the right type of wood paneling. Shiplap typically has a rough-hewn, weathered look, so choose a paneling that has a similar finish. You can find this type of wood paneling at most home improvement stores.

2. Install the panels horizontally. This will give your room a more traditional shiplap look. 3. Use construction adhesive to attach the panels to the wall.

This will ensure that they stay in place and don’t start to peel away over time. 4. Add trim around the edges of the panels for a finishing touch. This will help them blend in with your other décor and really give your room that shiplap feeling!

Read: How to Fix Wood Paneling Walls

How to Make Wood Paneling Look Like Drywall


How Do You Paint Paneling So It Doesn’T Look Like Paneling?

If you’re tired of your old paneling and want to give it a fresh new look, painting it is a great option. But how do you paint paneling so it doesn’t look like paneling? Here are a few tips:

1. Use a primer – This will help to cover up any dark colors and provide a smooth surface for painting. 2. Choose the right paint color – If you want your paneling to blend in with your walls, go for a light-colored paint. If you want it to stand out, choose a bolder hue.

3. Use painters tape – Mask off any areas that you don’t want painted, such as baseboards or trim. This will help create clean lines and prevent accidental brushstrokes. 4. Use a foam roller – This will help avoid any streaks or brush marks on your finished product.

How Do You Make Wood Paneling Look Modern?

Wood paneling can look modern with a few simple design tricks. First, consider painting the wood panels white or another light neutral color. This will help to brighten up the space and make it feel more open and airy.

You could also paint the trim around the panels a darker color for contrast. Another option is to install the wood panels horizontally instead of vertically. This will give the space a more contemporary feel.

Finally, consider adding some new hardware to the wood paneling such as sleek doorknobs or pulls.

Read to know: Can You Hang Things on Wood Paneling?

Can You Skim Coat Wood Paneling?

Wood paneling can be an attractive addition to any room in your home. It can provide a classic look that is both timeless and stylish. However, one downside of wood paneling is that it can be difficult to keep clean.

Dust and dirt can accumulate in the grooves, making it hard to dust or vacuum. One solution is to skim coat the wood paneling. This will fill in the grooves and give the paneling a smooth, finished look that is much easier to clean.

Skim coating is a fairly simple process, but there are a few things you need to know before you get started. First, you will need to choose the right type of primer and paint for your project. You also need to make sure that the surface of the wood paneling is properly prepared before you start painting.

Once you have everything you need, simply follow these steps: 1. Begin by sanding down the wood paneling with fine-grit sandpaper. This will help create a smooth surface for the primer and paint to adhere to.

2. Next, apply a thin layer of primer to the paneling using a roller or brush designed for use with latex paints. Allow the primer to dry completely according to the manufacturer’s instructions before moving on to step three. 3 .

Now you are ready to apply the skim coat itself! Begin by mixing together joint compound and water according to the package directions (usually about two parts joint compound to one part water). Then spread this mixture over the primed wood paneling using a large putty knife or trowel, working in small sections until all of the paneling is covered .

How Can I Make Cheap Wood Paneling Look Good?

If your wood paneling is looking a little dated, there are some easy ways to give it new life. Paint is always a good option, but if you want to keep the wood look, there are some tricks you can use to make it look its best. Start by giving the paneling a good cleaning.

If it’s been awhile since it was last cleaned, you may need to give it a light sanding first to remove any dirt or grime that’s built up on the surface. Once it’s clean, take a close look at the condition of the wood. Are there any cracks or holes that need to be filled?

Is the finish looking worn or dull? Once you’ve addressed any major issues, it’s time to start thinking about paint or stain. If you want to keep the natural wood look, opt for a clear sealer or polyurethane.

This will help protect the paneling from future wear and tear and make cleanup easier if something does happen to spill on it. For added protection, consider adding a layer of wax after the sealer has dried. If you’re not worried about hiding the grain of the wood, paint is always an option.

White paint can brighten up a dark room and makes paneling look fresh and new again. Just be sure to use a primer before painting so that your color goes on evenly and doesn’t streak. With just a little bit of work, you can transform your tired old paneling into something that looks brand new – without spending a lot of money!

Read to find best one: How to Paint Cardboard to Look Like Wood


Wood paneling was once a popular wall covering in homes, but it fell out of favor in the 1970s. Today, however, it is making a comeback as people are looking for ways to add character to their homes. If you have wood paneling that you would like to update, there are a few things you can do to make it look like drywall.

sand the surface of the wood paneling to rough it up and remove any glossy finish. This will help the primer and paint adhere better. apply a layer of primer to the panels using a roller or brush.

Be sure to get into all the crevices and corners. Allow the primer to dry completely before proceeding. once the primer is dry, paint the panels with a color of your choice.

A semi-gloss or high-gloss finish will give the best results.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *