How to Cover Concrete Steps With Removable Wood Step

If your concrete steps are in need of a facelift, you can cover them with removable wood steps. This project is not as difficult as it may seem, and it will make a big impact on the curb appeal of your home. You will need to gather some supplies before you get started, including wood boards, screws, and washers.

You will also need a drill and a saw. Once you have all of your supplies, you can begin attaching the wood steps to your concrete stairs.

  • Remove any existing stair treads and risers from the concrete steps
  • Measure the width and depth of each step, and cut wood boards to size accordingly
  • Attach the wood boards to the steps using screws or nails
  • Be sure to predrill holes for the screws to avoid splitting the wood
  • Add a layer of exterior-grade plywood over the top of the wood boards for added stability, if desired
  • Finish off by adding new stair treads and risers back on top of the newly covered steps

Watch This Video Before Covering Concrete Stairs With Wood – Home Remodeling Ideas

How to Make Concrete Steps Look Better

If your home has concrete steps that are in need of a facelift, there are several ways to make them look better. You can paint or stain the concrete to give it new life, or you can cover it with stone veneer or brick pavers. If you want a more permanent solution, you can replace the concrete steps with new ones made from stamped concrete, stone, or brick.

Whatever route you choose, giving your concrete steps a makeover will add curb appeal to your home and increase its value.

How to Cover Concrete Steps With Pavers

If your home has concrete steps leading up to the front door, you may be wondering how you can make them more attractive. One option is to cover the concrete with pavers. This project is not as difficult as it might sound, and it can really improve the look of your home’s exterior.

Here are the basic steps for covering concrete steps with pavers: 1. Clean the Steps The first step is to clean the concrete steps.

Be sure to remove any dirt, debris, or stains that might be present. You may need to use a power washer or some other type of cleaning solution to get them completely clean. 2. Measure and Cut Pavers

Once the steps are clean, you’ll need to measure and cut pavers to fit over them. It’s important to get an accurate measurement so that the pavers fit snugly against each other without any gaps in between. Use a wet saw or masonry blade on a circular saw to cut the pavers as needed.

If you don’t have access to these tools, you may be able to have someone at a hardware store do it for you. Just be sure that all of your cuts are precise before moving on.

How to Cover Concrete Stairs With Wood

If you have concrete stairs that are in need of a makeover, one option is to cover them with wood. This can be a fairly easy project, and it will give your stairs a whole new look. Here are the steps you’ll need to take to cover your concrete stairs with wood:

1. Start by measuring the treads and risers of your staircase. You’ll need enough lumber to cover all of the surfaces. 2. Cut the lumber to size using a saw.

If you’re not comfortable doing this yourself, you can always have it done at a hardware store or home improvement center. 3. Apply construction adhesive to the back of each piece of lumber. This will help ensure that the wood stays in place once it’s installed.

4. Press the lumber into place on the staircase, starting with the treads and then moving on to the risers. Use a hammer or other tool to tap it into place if needed. 5 .

Covering Indoor Concrete Steps

Concrete steps are a common feature in many homes. They provide access to the front door and are often used as an exit from the home in case of an emergency. While concrete steps are durable and require little maintenance, they can be challenging to keep clean.

Here are some tips for covering indoor concrete steps: 1. Choose a material that is easy to clean and maintain. Carpet or tile are good options because they can be vacuumed or mopped as needed.

2. Make sure the material you select is slip-resistant. This is especially important if your steps are located near a doorway where people might track in mud or snow. 3. Consider using adhesive strips or mats at high-traffic areas to reduce wear and tear on your coverings.

How to Cover Concrete Steps With Removable Wood Step


Can You Build Wood Steps Over Concrete Steps?

If you have a set of concrete steps leading up to your home, you may be wondering if you can simply build wooden steps over them. After all, it would save you the time and expense of having to remove the concrete steps completely. The answer is yes, you can build wood steps over concrete steps – but there are a few things you need to keep in mind first.

The most important thing to consider is the height of your new wooden steps in relation to the height of the existing concrete steps. If they’re not going to line up perfectly, then you’ll need to make some adjustments. For example, you might need to shim up the bottom of your wooden stairs so that they’re level with the top of the concretesteps.

Or, if your new stairs will be taller than the existing ones, you’ll need to cut away part of the concrete so that there’s enough room for your new staircase. Another thing to think about is how well attached the existing concrete steps are to their foundation. If they’re loose or crumbling at all, then it’s probably not a good ideato build anything on top of them.

You don’t want your new stairs collapsing because the old ones couldn’t handle the weight! Assuming that everything looks good and sturdy, building wooden steps over existingconcrete ones is actually pretty easy. Just use treated lumber for any portion that will be coming into contact with soil or moisture (such as stair treads) and regular lumber for everything else (like risers and stringers).

Attach everything together using galvanized nails or screws, taking care to predrill holes first so thatyou don’t split any wood. And that’s it!

What Can I Use to Cover Concrete Steps?

If you’re looking to cover your concrete steps, there are a few options available to you. You could opt for painting them, which would give you a lot of freedom in terms of design and color. You could also use tiles or stone veneer to give your steps a more finished look.

Whichever route you choose, be sure to do some research beforehand so that you know what materials and tools you’ll need.

How Do You Cover Stairs With Wood?

Assuming you would like tips on how to cover stairs with wood: One way to cover stairs with wood is to install hardwood flooring. This can be done by nailing or stapling the planks directly to the treads and risers.

Another option is to install engineered hardwood, which comes in tongue-and-groove planks that fit together like puzzle pieces. You can also glue these planks down or float them over a thin layer of padding. If you have carpeted stairs and want to switch to wood, you’ll first need to remove the old carpeting and any staples or tacks that are left behind.

Once the surface is clean and smooth, you can proceed with installing your new flooring. When it comes time to choosing wood for your staircase, there are many different options available. Hardwoods such as oak, maple, and cherry are all popular choices for staircases because they’re strong and durable.

You can also opt for softer woods such as pine if you want a more traditional look. If you’re unsure of which type of wood would be best for your staircase, it’s always a good idea to consult with a professional contractor before making your final decision.

How Do You Cover Crumbling Concrete Steps?

If your concrete steps are starting to crumble, it’s important to take action quickly to prevent further damage. There are several ways you can cover crumbling concrete steps: 1. Use a Concrete Patching Compound

If the damage is minor, you may be able to simply patch the area with a concrete patching compound. This will help to fill in any cracks or holes and restore the surface of the steps. Be sure to follow the instructions on the product label carefully.

2. Apply a Concrete resurfacer If the damage is more extensive, you may need to apply a concrete resurfacer. This is a thick liquid that will smooth out the surface of your steps and cover up any imperfections.

Again, be sure to follow the instructions carefully when using this product. 3. Cover with Stone Veneer or Brick Pavers Another option for covering up damaged concrete steps is to install stone veneer or brick pavers over them.

This will give your stairs a whole new look while hiding any imperfections. Be sure to consult with a professional before undertaking this project, as it can be somewhat complex.


When it comes to redoing your concrete steps, there are a lot of different options out there. You could go the traditional route and simply paint them, but if you’re looking for something a little more unique, why not try covering them with removable wood steps? Not only will this give your home’s exterior an instant facelift, but it’s also a relatively easy and inexpensive project that you can do yourself in just a few hours.

Plus, when you’re ready for a change or if the wood steps start to show wear and tear, you can simply remove them and try something new. Here’s how to get started: 1. Measure the width and depth of each step so you know how much wood you’ll need to purchase.

Then, head to your local home improvement store or lumberyard to pick up the supplies. 2. Cut the pressure-treated lumber into pieces that will fit snugly on each step. If you’re not comfortable using power tools, ask someone at the store to make the cuts for you.

3 . Drill pilot holes into each piece of wood before attaching it to the step with screws (this will help prevent splitting). Start from the back and work your way forward, predrilling and countersinking each screw as you go.

4 . To give your new steps a finished look , add some trim around the edges using 1×4 boards . Just like before , drill pilot holes and attach with screws .

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *