How to Round Wood Edges

There are a few different ways that you can round wood edges, depending on what type of project you’re working on and the tools that you have available. If you’re working with hand tools only, you can use a spokeshave or drawknife to achieve a rounded edge. For larger projects, or if you’re working with power tools, an electric router will give you the best results.

Whichever method you choose, the process is relatively straightforward and just requires a little practice to perfect.

  • Find a piece of wood that you want to round the edges of
  • Use a sander to sand down the edges of the wood until they are smooth
  • Use a router to round off the edges of the wood
  • Use a saw to cut off any excess wood that is sticking out
  • Sand down the edges one last time and then you are finished!
How to Round Wood Edges


How Do You Round Wooden Edges Without a Router?

There are a few ways that you can round wooden edges without a router. You can use a hand held sander with the proper sandpaper grit, you can use a power drill with a rounded bit, or you can use a rotary tool. The best way to get uniform results is to use a template of some sort so that all of your cuts are exactly the same.

How Do You Round a Piece of Wood?

There are a few ways to round a piece of wood. The most common way is to use a router. A router is a tool that has a spinning bit that cuts into the wood.

To use a router, you will need to set up the router so that the bit is spinning in the correct direction and at the correct speed. Then, you will hold the router against the wood and move it in a circular motion. The bit will cut into the wood and create a rounded edge.

Another way to round a piece of wood is to use sandpaper. You can wrap sandpaper around your finger or another object and rub it along the edge of the wood. This will wear down the sharp edges of the wood and round them off.

You can also use power tools such as an orbital sander or belt sander to round edges of wood. These tools have abrasive pads that spin quickly and will smooth out any rough edges on your wood pieces.

How Do You Round Edges With a Sander?

One way to round edges with a sander is to use a handheld belt sander. To do this, you’ll need to attach a sanding belt to the sander that’s the appropriate size for the edge you’re trying to round. Then, simply hold the sander against the edge and move it in a circular motion until the desired shape is achieved.

Another option is to use a hand-held orbital sander. This type of sander doesn’t require a sanding belt – instead, it has a circular pad that spins and sands the surface as you move it across. To round edges with an orbital sander, you’ll want to use a lower speed setting and make sure that the pad is always flush against the surface.

Again, work in small, circular motions until you’ve achieved the look you’re going for.

round edge of wood with files

How to Round Wood Edges by Hand

In woodworking, rounding over is the process of creating a smooth, rounded edge on a piece of lumber. This can be done by hand using a router or other power tool, or by sanding the edges with sandpaper. When done by hand, rounding over is a slow and tedious process, but it’s well worth the effort for pieces that will be visible and handled often.

Here’s how to round over wood edges by hand: 1. Start with a sharp chisel. A dull chisel will make the job much harder than it needs to be.

2. Cut into the wood at a 45 degree angle, making sure to keep the blade perpendicular to the surface of the wood. 3. Work your way around the entire edge of the piece until all of the sharp corners have been removed. 4. Use a fine-grit sandpaper to smooth out any roughness remaining from cutting with the chisel.


If you’re looking to round wood edges, there are a few different methods you can use. One popular method is using a router. A router is a handheld power tool that uses a spinning bit to cut away material.

Another common method is sanding by hand. This involves using sandpaper to slowly wear down the sharp edges of the wood. Whichever method you choose, take your time and be careful not to remove too much material.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *