How to Cover Concrete Stairs With Wood

Concrete stairs are durable and require little maintenance, but they can be an eyesore. One way to improve the look of your concrete stairs is to cover them with wood. This project is not as difficult as it may seem, and it can be completed in a weekend.

With a few supplies from your local hardware store, you can have beautiful wood-covered stairs that will last for years.

  • Remove any loose debris or dirt from the concrete stairs with a brush
  • Apply a layer of construction adhesive to the stairs using a notched trowel
  • Place the first riser (piece of wood) against the wall and press it into the adhesive
  • Nail each riser into place using 2-inch finishing nails and a hammer or nail gun
  • Repeat steps 3 and 4 for each remaining riser, working your way down the stairs
  • Cut treads (pieces of wood) to fit each step, allowing for overhang on each side
  • Attach treads by screwing them into each riser from underneath using 2-inch deck screws and a drill or screw gun

Concrete Stairs Makeover With Wood Decking

Covering Concrete Steps With Trex

If you have concrete steps leading up to your home, you may be looking for a way to cover them. Trex is a great option for this project. Trex is a composite material made from recycled plastic and wood fibers.

It looks like natural wood but doesn’t require the same maintenance. Trex comes in a variety of colors and can be cut to fit your steps. It’s also slip-resistant and durable, making it a great choice for covering concrete steps.

Covering Concrete Steps With Composite Decking

If your home has concrete steps, you may be wondering if there’s a way to make them more attractive and inviting. One option is to cover them with composite decking. This material is durable and easy to maintain, so it’s a great choice for high-traffic areas like stairs.

Here are some things to keep in mind when covering concrete steps with composite decking: The first step is to determine how much decking material you’ll need. You’ll also need to factor in the width of the treads (the horizontal part of the step that you walk on) when making your calculations.

It’s best to err on the side of caution and get a little extra material than you think you’ll need just in case. Once you have your materials, it’s time to start installation. Begin by attaching furring strips around the perimeter of each step using masonry screws or nails.

These strips will provide a surface for the decking boards to attach to and will help keep them level. Next, cut your composite decking boards to size and attach them to the furring strips using screws designed for Composite Deck Installation . Be sure that all edges are properly supported before moving on.

How to Build a Porch Over Existing Concrete Steps

Building a porch over existing concrete steps is a great way to add some curb appeal to your home. Porches are a great place to relax and enjoy the outdoors, and they can also add value to your home. If you have concrete steps leading up to your front door, you can easily build a porch over them.

Here’s how: 1. Determine the size of the porch you want to build. You’ll need to know how much space you have to work with so that you can plan accordingly.

2. Create a blueprint or sketch of your proposed porch design. This will help you visualize what you’re aiming for and make sure that everything will fit properly. 3. Obtain the necessary building materials and tools.

Unless you’re experienced in construction, it’s best to leave this part to the professionals. They will know exactly what supplies you need and how much of each material is required..

4 Hire a contractor or team of contractors experienced in building porches if possible .

How to Make Concrete Steps Look Better

If your home has concrete steps, there are ways to make them look better. You can paint them, add a slip-resistant surface, or cover them with stone or brick veneer. Concrete steps can be an eyesore, but there are ways to improve their appearance.

One way is to paint them. You can use a concrete stain or exterior latex paint specifically for concrete. Be sure to clean the steps first and let them dry completely before painting.

Apply two coats of paint for best coverage. Another way to make concrete steps look better is to add a slip-resistant surface. This is especially important if the steps are outdoors and get wet often.

There are several products on the market that can be applied to concrete to create a slip-resistant surface. Be sure to follow the manufacturer’s instructions for application and curing times. You can also cover concrete steps with stone or brick veneer.

This will give them a completely new look and feel. Be sure to prepare the surface of the concrete properly before applying the veneer so that it adheres well. Follow the manufacturer’s instructions for installation of stone or brick veneer over concrete.

How to Cover Concrete Stairs With Wood


Can You Cover Cement Stairs With Wood?

Yes, you can cover cement stairs with wood. You will need to use a product like PermaGrip to adhere the wood to the cement. You may also want to use a primer prior to applying the PermaGrip.

How Do You Attach Wood Stairs to Concrete?

If you’re attaching wood stairs to concrete, you’ll want to use a method that will ensure a strong and durable connection. One way to do this is to use lag bolts. Lag bolts are large screws that come with washers attached.

To attach your wood stairs to concrete using lag bolts, first drill pilot holes into the concrete. Then, insert the lag bolts into the pilot holes and tighten them down. The washers will help distribute the load evenly and prevent the lag bolts from pulling out over time.

Another option for attaching wood stairs to concrete is through the use of expanding anchor bolts. These are similar tolag bolts, but they have an expansion mechanism built in that allows them to grip the sides of the hole as they’re being tightened down. This provides extra holding power and can be a good option if you’re worried about the lag bolts pulling out over time.

expanding anchor boltsto secure your wood stairs to concrete, simply drill pilot holes and then insert the expanding anchors into the holes. Tighten them down according to manufacturer’s instructions and you should have a secure connection that will last for years.

What Can I Cover My Concrete Steps With?

If your concrete steps are in need of a facelift, there are several options for covering them. You can choose from materials like stone, brick, or tile to give your stairs a new look. Each option has its own set of pros and cons, so be sure to do your research before making a final decision.

Stone is a popular choice for covering concrete steps because it provides a natural look. Stone veneer is thin and easy to install, so it’s a good option if you’re looking for a quick fix. However, stone can be expensive and it may not be the best choice if your stairs are in need of major repairs.

Brick is another popular material for covering concrete steps. Brick provides a classic look that can improve the curb appeal of your home. Like stone, brick is thin and easy to install.

But bricks can be difficult to match if you need to make repairs in the future. Brick pavers are another option for covering your concrete steps with brick. Pavers offer more flexibility than standard bricks because they come in various sizes and shapes.

This means you can create patterns or designs with your pavers that add personality to your stairs. However, pavers can be expensive and they require more maintenance than other materials since they need to be sealed regularly. Tile is another popular material for stair coverings because it’s durable and comes in many different colors and styles.

How Do You Build Wood Stairs on Concrete Steps?

Building a set of stairs on concrete steps is a fairly straightforward process, but there are a few things to keep in mind. First, you’ll need to make sure the concrete steps are level and even. If they’re not, you may need to shim them before attaching the wood.

Next, you’ll need to attach stringers to the concrete steps. You can do this by using concrete screws or by drilling into the step and using masonry anchors. Once the stringers are attached, you can then attach your treads and risers to them.

If you’re not comfortable working with tools or building stairs, it’s best to hire a professional contractor to do the job for you.


Concrete stairs can be an eyesore, but they don’t have to be! You can cover them with wood to create a more aesthetically pleasing look. To do this, you’ll need to measure the stairs and cut the wood accordingly.

Attach the wood to the concrete using screws or nails, being careful not to damage the concrete. You may want to use a primer before painting or staining the wood to get the best results.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *